Indoor LED display screen in the switch screen to pay attention to what?

  Nowadays, with the continuous development of the economy and society, the scope of application of indoor LED display has become more and more extensive, no matter you walk in the streets and alleys, or in the bustling city plaza, high-grade entertainment venues can be seen in the figure of outdoor LED display. However, in the use of indoor LED display process, many customers in the installation of indoor LED display, then used very good, but soon after the after-sales call, said a little problem, after checking found that this is mainly switching the screen when the omission of a number of small details of the precautions. Then you knowIndoor LED DisplayDo you need to pay attention to anything when switching the screen? The following Vishay Technology editorial is for you to introduce:

  Indoor LED display should pay attention to the following matters when switching on and off the screen:

  1, open the screen, first open the control computer so that it can operate normally and then open the indoor LED display screen.

  2, off the screen, first turn off the power of the indoor LED display, turn off the control software, and then properly shut down the computer. (Turn off the computer first without turning off the display, will cause the screen to appear high brightness, burn the lamp, the consequences are serious)

  3, indoor LED display screen switch screen interval should be greater than 5 minutes.

  4, many times when switching the screen, the time interval should be at least 3 minutes -15 minutes, to prevent the short time switch burned diode.

  5, if often indoor LED display power switch tripped, in order to ensure the safety of indoor LED display should be closed first, and then check.

  6, as far as possible after the computer into the project control software, and then open the indoor LED display, reduce the working time, prolong the service life.

  7, try to avoid pure white screen under the open indoor LED display, to prevent a short period of high current on the impact of indoor LED display.

  8、Regularly check the firmness of the hanging joints, such as the phenomenon of loosening, attention should be paid to timely adjustment, re-strengthening or updating the hanging parts.

  In summary, it is indoor LED display screen in the switch screen to pay attention to some matters. If the indoor LED display screen is not used for a long time, it should be frequently energized maintenance debugging, this is because the indoor LED display screen in a long time not used, and then enabled when it is likely to appear dead and blind spot. Therefore, it is necessary to frequently energize and light up the screen for debugging.