What are the main devices included in the LED folding screen?
At present, the LED folding screen by virtue of its own slim and lightweight, can be folded 360 ° and other advantages, by the major entertainment activities platform favorite, can be said to really realize a screen in hand, say go, transport is very convenient. However, we all know that the LED folding screen is composed of a lot of devices, so do you knowLED Folding ScreenWhat are the main devices included? The following Vishay technology editorial for your introduction:
The main devices included in the LED folding screen, are as follows:
1、Display Module
Indoor fixed Smart6 model folding screen product display module, size is 192mmX192mm, optional lamp bead material is the SMD3528, module thickness is 14mm, so the overall thickness of the whole screen is also 14mm, and the thickness of the conventional P6 model display screen thickness of the thin to almost 90mm.
LED folding screen module back is a fully enclosed shell design, simple and beautiful, good integrity, but also on the module inside the PCB circuit board to form an effective protection, greatly reducing the product failure rate. The four corners of the module are equipped with slider design, used to fix the lock module and the module directly connected to the wire rope. Slide open the slide buckle, take out the wire rope, you can easily remove the module and replace the module.
2、Power and signal cables
The power supply system and the signal receiving system are integrated together with the control box and the connection between the screen body is mainly through the interface in the following figure. each column module of the LED folding screen only needs to set up an interface, which can completely realize the power supply and signal transmission of this column module.
The power line and signal line are integrated together in the two-in-one control line, a column of modules to put one, the standard length is 1 M. This design is quite convenient, for product manufacturing and screen installation have saved a lot of work.
3. Control box
Control box is a very important and indispensable part of the LED folding screen, the screen receiver card and switching power supply are installed in the control box. In general, the standard configuration of LED folding screen is 4 columns of modules with a control box, the internal configuration of the switching power supply will be based on different screen power consumption to match the different power consumption of the switching power supply.
4、Product Packaging
LED folding screen product packaging, are generally very common air box packaging, easy to transport. Smart6 model of this product, this size of 820mmX650mmX280mm air box, can be loaded with 10 square meters of folding screen body, that is, the height of 1M of this air box can be loaded with 30 square meters of the screen, basically a little bit of a bigger family SUV car can be easily loaded, the degree of convenience can be imagined.
To summarize, it is the main devices included in the LED folding screen. If you are interested in the product, you can go to Vishay to actually look at the physical product, so as to more intuitively appreciate the charm of this product. If you still want to know more about the LED folding screen related knowledge, please continue to pay attention to the official website of Vishay Technology.
