What are the tips to improve the quality of LED stage screen?

  At present, we can challenge to see the existence of LED stage screen figure in some large-scale performances, cultural evenings, celebrity concerts, events ...... and other places. If you want to get a good experience, you must need to control and improve the quality of LED stage screen. After all, the LED stage screen display effect will to a certain extent affect the user and the masses, this time to improve the quality of the LED stage screen skills is particularly important. Then you know to improve theLED stage screenAre there any tips for quality? The following is a small introduction from VisiTech:

  Tips to improve the quality of LED stage screens are as follows:

  1, maintain the humidity of the environment used in the LED stage screen, do not let anything with moisture properties into your LED stage screen.

  Powering an LED Stage Screen that contains moisture will result in corrosion of the LED Stage Screen components, which will result in permanent damage and is therefore impossible to perform. In addition, if for any reason the LED Stage Screen gets water in it, immediately turn off the power and contact maintenance until the display panel in the screen is dry before using it again.

  2, the power supply required for power stability, good grounding protection, should not be used in poor natural conditions, especially in strong lightning weather.

  To avoid possible problems we can choose between passive and active protection, try to keep items that could damage the LED stage screen away from the screen and wipe the screen as gently as possible to minimize damage.

  3, do not expose the LED stage screen in the outdoor environment for a long time, wind, sunlight, dust and so on are easy to get dirty, after a while, the screen is definitely a piece of dust, need to be cleaned immediately. In addition, we need to regularly check whether the LED stage screen is working properly. The line is not damaged. If it does not work, it should be replaced in time. If the line is damaged, it should be repaired or replaced in time.

  To summarize, these are some tips to improve the quality of LED stage screen. By doing a good job in these areas, we can maximize the performance mood, so that you get a better view of the experience, so that you can produce an immersive feeling of the scene.