How to install outdoor advertising display can prevent leakage?

  A lot of businesses in order to better expand the advertising effect, a variety of marketing methods fancy, which includes the use of outdoor advertising display, combined with the scene to do marketing, to provide users with interactive and experiential outdoor advertising, which not only enhances the audience's interactive experience, but also effectively strengthen the brand awareness and promote the occurrence of purchasing behavior. However, when the outdoor advertising display is applied outdoors, it will be affected by high temperature, cold wave, gusty wind, rain and other bad weather, and if you don't do a good job of waterproofing when installing it, it is likely to lead to water leakage of the outdoor advertising display. So do you know how to installOutdoor Advertising DisplayCan you prevent water leakage? The following is a small introduction from VisiTech:

如何安装户外广告显示屏可以防止漏水?

  Installing outdoor advertising displays in this way prevents leaks:


  1、Hitting the water leak


  If the outdoor advertising display and the backboard are tightly combined, the water leakage port must be played below. The so-called water leakage port is used for water leakage, regardless of outdoor advertising display front and back of the combination of how tight, over the years, there is still more or less water inside, if the lower mouth does not leakage holes, over time the water will be more and more, if you play the leakage holes, the water will flow away, so that it can play a very good waterproofing role in extending the service life of the outdoor advertising display is also beneficial.


  2. Suitable routes


  Installation of outdoor advertising display, plug wiring must choose the appropriate wire, generally abide by the principle of rather big than small, that is, calculate the total power of the outdoor advertising display, choose a slightly larger wire, do not choose just right or too small wire, which can easily cause the line to burn, thus affecting the safe operation of the outdoor advertising display.


  3. Add backing plate to beat sealant


  There are a lot of friends in order to save trouble, the installation of outdoor advertising display does not add backplane or backplane does not play sealant, so that after a long time, the electronic components will certainly enter the water, and over time outdoor advertising display will have problems. The electronic components are afraid of water, once the water enters the line, it will certainly trigger the line to burn, therefore, for these problems that can be solved at hand, must not be ignored.


  To summarize, we play the leakage port, choose the appropriate route, plus the back plate to play the sealant three methods, so that in the installation of outdoor advertising display can effectively prevent water leakage, so that we can better ensure that the outdoor advertising display is in a safe and steady state in the operation of the state.

Related News

TOP