What's wrong with the incomplete display of LED auto lifting screen?

  In today's modern large screen display technology, LED auto lifting screen has become an indispensable and important part. Its advantages of high definition, rich color, high brightness and low energy consumption have made LED auto lifting screen widely used in large-scale scenarios such as advertising campaigns, conferences, exhibitions and displays. However, LED auto lifting screen will appear incomplete phenomenon in the process of using, mainly manifested as incomplete display on the left and right sides or up and down ends. So do you knowLED automatic lifting screenWhat's wrong with incomplete display? The following VisiTech editorial is for you:

  Possible reasons for incomplete display of LED Auto Lift Screen:

  1, if the resolution of the LED automatic lifting screen does not match the equipment, the display will appear incomplete.

  2, LED automatic lifting screen in operation if suffered a strong electromagnetic interference, will also cause the display is incomplete.

  3, if the signal transmission is not stable, or the transmission distance is too far, it will also lead to the LED automatic lifting screen display is not complete.

  4, if the LED screen connection and input interface connection is poor, or LED automatic lifting screen itself is damaged, may lead to incomplete display.

  5, LED automatic lifting screen panel quality will also affect the display, if the panel is tilted or uneven, there will be part of the display is not complete.

  LED auto lifting screen display incomplete solution measures:

  1, check whether the resolution setting is correct, if not, you need to reset the resolution of the LED auto lifting screen.

  2, check whether the surrounding environment of the LED automatic lifting screen electromagnetic interference, need to change the environment or use shielding equipment.

  3, check whether the signal transmission line is smooth and stable, you can use signal amplification or use higher quality wire to stabilize the signal transmission of the LED automatic lifting screen.

  4, check whether the interface of the LED auto lifting screen is good contact, if not, you need to reconnect or replace the monitor.

  5, check whether the panel of LED auto lifting screen is flat, if not, need to readjust.

  In summary, is the possible reasons for the incomplete display of the LED ascending and descending screen and the corresponding measures to solve the problem. In the process of using the LED automatic lifting screen, it is inevitable that there may be some problems, at this time, we only need to analyze the specific circumstances and be resolved.